WELCOME TO THE C7 CONCEPTS ONLINE STORE
124g for Slip-fit axle
134g for threaded titanium axle
Threaded collars eliminate any bearing binding from due to tightening axle. Adjustable preload
7075 aluminum SlipFit axle
Titanium axle made from 6/4 Ti
45mm Flange spacing
Reduce frontal area exposed to wind
Precision machined surfaces end exacting tolerances
Flanges angled to match spoke angle. Spoke heads free from tension from unnecessary bending
Carbon Fiber 3k gloss center shaft with billet 7075 aluminum bearing races. Knurled surface for maximum grip while clamped. (Save 40g)
Carbon Fiber 3k gloss center shaft with billet 7075 aluminum bearing races. Knurled surface for maximum grip while clamped. (Save 35g)
Complete kit to upgrade your TopEnd bottom bracket from stock aluminum spindle, quad bearing configuration. Includes carbon spindle, bearing spacers and optional hybrid ceramic bearings. (Save 100g total)
Stock TopEnd bottom brackets use two bearings per side. Using these spacers, eliminate one of the bearings from each side to save 50g and allow your spindle to spin smoother.
30mm inner diameter (34mm OD) carbon fiber spacers for any 30mm diameter bottom bracket spindle. Available in 25mm, 19mm, 3mm, and 1.5mm widths
To be used with CarbonBike cranks and bottom bracket bearings. Spacers are 1mm thick, compared to the 2mm stock spacer. The thin width allows for fine adjustment of chainline.
47x35x7 bearing size for CarbonBike cranks can be hard to find. Check the online store for Enduro ABEC 5, hybrid ceramic bearings.